Equipped with the latest in test and calibration equipment, The Governor Shop ensures that your governor or actuator is repaired and calibrated to OEM specifications. We use Genuine Woodward, GAC, HEIZNMANN, HOOF / PIERCE governor parts to maintain reliability and longevity of our products.
Download our reference guide to basic adjustments and settings on the various hydraulic governors we carry.
Governors America Corp.
OFFICIAL DISTRIBUTOR
The Governor Shop is the official distributor for Governors America Products!
GAC’s broad, technically advanced line of electronic governing and fuel control systems provide solutions for your needs in both cost and complexity.
Engine control systems range in cost and complexity from single-speed isochronous governors to sophisticated multi-engine load-sharing/power-control systems, full authority drive-by-wire systems, locomotive diesel electric controls, full engine generator military control systems and a great variety of complementing governing and control system accessories.
Download the complete GAC product catalogue here (PDF, 7MB).
Visit www.governors-america.com to find more information on GAC products.
COMMON PART NUMBERS:
ADC100-12/24
ADC225S-12/24
ADC120S-12/24
ALN050-12/24
ATB652T2N-12/24 ATB552T2N-12/24 ATB452T2N-12/24 ATB75T4N14-24
ESD2210-12/24 ESD2402-12/24
ESD5131 ESD5111 ESD5500E ESD5526E ESD5528E
EEG6500 EEG6550
MSP675 MSP677 MSP6720 MSP6731 MSP6734 MSP6742
COMMONLY USED WITH:
Arrow, Caterpillar, Cummins, Deutz, Kubota, Perkins, Isuzu, Ford, Chevy, John Deere, Yanmar
WOODWARD
UG-8 Governor
The Woodward UG-8 Governor is a mechanical hydraulic governor for controlling diesel, gas, or dual fuel engines, or steam turbines.
UG Lever governors are widely used for variable speed control. Remote speed setting can be either mechanical through the speed setting lever or pneumatic with a special speed setting device. Special attachments are available for other applications.
This proven design has been industry standard for many years. World-wide acceptance provides easy service in most engine and governor shops.
COMMON PART NUMBERS:
035173
8520-0038
8520-222
8540-564
8540-614
155743F
8520-0077
143-6144
OR7965
COMMONLY USED ON:
- Waukesha
- Caterpillar
- White Superior
WOODWARD
SG/PSG
The SG/PSG governor provides hydraulic powered travel in the increase-fuel direction only. A return spring is used to provide travel in the decrease-fuel direction. The standard PSG cover provides for a vertical return spring in the governor. Governor models are available with horizontal return springs, or the governor can be fitted with a customer supplied external return spring.
Spring-driven and oil-damped ballheads are available to filter out torsional vibrations. A special temperature-compensated needle valve can be supplied to compensate for temperature effect on stability.
COMMON PART NUMBERS:
8511-700 8561-653 8561-739 8561-828 8561-904 8561-632 8561-671 8561-761 8561-675 111-0630 132-7463 6I0764 211217G 406258 211217G 211217D 211217J 8512-110 8511-463 8511-443 8511-155 164529A 32270103 164529K 164529N
** We stock many other part numbers for this product series.
COMMONLY USED ON:
- Waukesha
- Caterpillar
- Cummins
WOODWARD
L-Series ITB
The L-Series Integrated Throttle Body Speed Control provides a building block approach to total engine management. The modular design consist of a die-cast aluminum throttle body, and a fully programmable integrated digital speed, position or process control, and bi-directional actuator.
The L-Series ITB incorporates the Woodward L-Series control with a throttle plate.
COMMON PART NUMBERS:
8404-2009
8404-2008
8404-2007
8404-4002
8404-4003
8404-4005
WOODWARD
EPG
The EPG (Electric Powered Governor) is designed for precise speed control of diesel, gas, gasoline engines, and gas turbines. The governor is especially suited to prime movers without a mechanical drive or hydraulic oil supply for the governor and which have low-mass, low-friction fuel linkages. Controls are built with dynamics designed for specific engine applications.
Units with start fuel limit can prevent startup overspeed and excessive startup smoke.
COMMON PART NUMBERS:
20R5449
330-5584
8256-016
8256-017
8256-060
8256-080
8290-147
8290-185
8290-187
305858
WOODWARD
EG3P Actuator
The EG-3P/6P/10P actuators convert an electrical signal to a proportional rotary output shaft position to control the flow of fuel or energy medium to a prime mover.
These actuators are suitable for controlling diesel and gas engines or steam and industrial-commercial gas turbines driving alternators, dc generators, pumps, compressors, papermaking machines, or locomotives. A Woodward hydraulic amplifier can provide larger work capacities.
COMMON PART NUMBERS:
4P-7087 6I-2160 7N9870 7W-6653 118-7590 8250-828 8250-845 8251-019 8251-046 8251-057 8251-058 163853K 163853U 163853V 163853Z 214201 4304770 D8250-749 E8250-055 E8250-454 E8250-474 E8250-479 E8250-501 F8250-869
COMMONLY USED WITH:
Woodward 2301A, 2301D,2301E Governor Controllers.
WOODWARD
2301 Electronic Governor
The 2301A Full Authority Speed Control sets the speed or load of a diesel engine, gas engine, steam turbine, or gas turbine according to the demand of a process or a computer control signal of 4–20 mA or 1–5 Vdc.
The unit provides isochronous operation, with droop control available through an externally wired potentiometer.
COMMON PART NUMBERS:
8273-1011
8273-1012
9905-025
9905-132
9905-014
9907-018
WOODWARD
TG13
TG Governors are self-contained, mechanical-hydraulic, speed-droop governors for use on small steam turbines driving pumps, compressors, or generators, where isochronous (constant speed) operation is not required. These governors are directly coupled to the steam-turbine’s rotor or auxiliary shaft to sense and control turbine speed.
COMMON PART NUMBERS:
8516-038 8516-039 8516-040 8516-041 8516-042 8516-42 8516-175 8516-176 8516-179 8516-180 8516-183 8516-184 9904-814 9904-816 9904-818 9904-822
COMMONLY USED WITH:
Elliot, GE, Dresser-Rand, Sulzer
WOODWARD
PEAK 150
PEAK 200
PEAK 150
The Woodward Peak 150® steam turbine control is a low-cost, compact, digital control for single-valve or single-valve rack steam turbines. It provides convenient operator control and speed display from the front panel. It is housed in a watertight, and dust-tight, enclosure. A corrosion-resistant enclosure designed to meet NEMA 4X requirements is also available.
PEAK 200
The Woodward Peak 200® controller is designed to operate small single valve, or single valve rack industrial steam turbines. This cost effective steam turbine controller includes specifically designed algorithms and logic to start, stop, control, and protect small industrial steam turbines or turbo expanders driving compressors, pumps, or industrial fans.
The Peak 200 control’s unique PID structure makes it ideal for applications where it is required to control steam plant parameters like turbine speed, turbine load, turbine inlet header pressure, turbine exhaust header pressure, pump flow, or compressor discharge, or suction pressure.
COMMON PART NUMBERS:
PEAK 150
9905-857
9905-860
9905-858
9905-861
9905-863
9905-866
9905-864
9905-867
PEAK 200
8200-1500
8200-1501
8200-1502
8200-1506
8200-1508
8200-1503
8200-1504
8200-1505
8200-1507
8200-1509
COMMONLY USED WITH:
Elliot, GE, Dresser-Rand, Sulzer
HEINZMANN
ROTARY ACTUATORS with Gearing
The range of HEINZMANN electrically driven actuators with gearing is based on a DC disc motor, which has been combined with a gear mechanism. These actuators provide a nominal torque of 4 Nm to 180 Nm and a control angle of 36° or 42°.
The actuators can be combined with various analogue or digital HEINZMANN governors and provide contactless position feedback.
COMMON PART NUMBERS:
STG40-10
STG40-14
581336
188-7390
COMMONLY USED IN:
- Medium and large size diesel and gas engines.
- Gas and steam turbines.
HEINZMANN
Direct Acting Rotary Actuators
This is a range of direct-acting actuators with a rotating shaft and an all-electric drive concept. The torque varies from 0.55 to 13 Nm at a maximum control angle of 36°, 53°, 68° or 70°.
They are primarily used for diesel and gas engines with outputs from 100 to 1,000 kW in vehicles and in industry, and can be combined with various analogue and digital HEINZMANN governors.
COMMON PART NUMBERS:
STG2080
STG2040
214046
187-3516
305256
HOOF / PIERCE GOVERNORS
MECHANICAL GOVERNORS
Mechanical governors have been used for many years in a variety of engines. Today they are used in everything from industrial generators, wood chippers, and airport tugs. Mechanical governors come in a variety of shapes and sizes, but the principle remains the same. We here at The Governor Shop stock these governors.
COMMON PART NUMBERS:
GC979HR5
GC979H5
GD959C
GC1002
BD540J
4099892
339560
351-396C
CATERPILLAR
Mechanical Governors
While many Caterpillar engines utilize advanced electronic control systems, with integrated engine speed governing capabilities, there are many Caterpillar engines, both gas and diesel, that require the use of separate engine speed governing systems. These Hydra-Mechanical governors are oil fed with rotating weights inside to control engine speed and adjust to load changes.
COMMON PART NUMBERS:
230-2607
5L8789
5N4415
7L4351
3N4077
7N2375
7N4360
7N2336
COMMONLY USED ON:
Caterpillar 3304, 3306NA, 3306TA, 342, 398, 399